Low display tray
FEFCO 0422
Flat, for the shelf or inside a display unit.
- Example size
- 400 × 300 × 40 mm internal
- Blank
- 483 × 419 mm
- Pieces
- 1
- Boards
- 12 available
Free to design and to download as PDF. €3 for the DXF or SVG.
How this one is built
- Four corner tray: the walls fold up, the corner tabs swing round and glue to the inside of the long walls.
- The corner tab sits 1.5 mm inside the wall - exactly one caliper - and starts 1.5 mm above the floor so it clears the base board.
- The short walls are inset by 1.5 mm at both ends so they stand inside the long walls.
- This construction needs glue. Pick a slotted tray if there is no gluer available.
What you can change
5 parameters on the first screen, 5 more behind advanced settings.
- Dimension mode
- Length (L)
- Width (W)
- Height (H)
- Board caliper (t)