Box types
24 presets built from six generators. Every thumbnail below is the actual dieline, drawn from the same code that writes your file.
Mailers
Mailer box
FEFCO 0427The e-commerce standard. Rolled side walls, ear lock, no glue.
Mailer with slot lock
FEFCO 0427Tabs through slots in the front wall. Closes tighter, a little more knife work.
Flat mailer
FEFCO 0427Low and wide, for clothing, prints and books.
Mailer without dust flaps
FEFCO 0427Less board and a narrower blank; the side wall becomes double instead of triple.
Mailer for tape
FEFCO 0427Plain flap without a lock, closed with tape or a sticker.
Shipping boxes
Regular slotted box
FEFCO 0201The classic carton. Major flaps meet in the middle.
Full overlap box
FEFCO 0203Flaps overlap completely. Double base, strong against push-through.
Open shipping tray
FEFCO 0200Half slotted: open top. Use as a tray or with a separate lid.
Overlap slotted box
FEFCO 0201Flaps overlap partly. Middle ground between RSC and full overlap.
Long narrow box
FEFCO 0201For profiles, tubes and framed work.
Cube box
FEFCO 0201Equal sided. The most board-efficient shape per litre of volume.
Trays
Glued corner tray
FEFCO 0422Base with four upright walls. The basis for display and produce.
Low display tray
FEFCO 0422Flat, for the shelf or inside a display unit.
Deep storage tray
FEFCO 0422Tall walls, for bulk or loose parts.
Two piece
Telescope box
FEFCO 0301The shoebox: lid over base, both pieces on one blank.
Flat telescope box
FEFCO 0301Low lid on a low base. For shirts, prints and documents.
Telescope with deep lid
FEFCO 0301Lid almost as tall as the base: double wall all the way round.
Folding cartons
Reverse tuck carton
ECMA A6040Glued tube with tuck flaps. Nests economically on the sheet.
Straight tuck carton
ECMA A6050Both flaps point the same way: a cleaner front face.
Tall slim carton
ECMA A6040For bottles, tubes and long products.
Flat card carton
ECMA A6040Shallow, for cards, jewellery and small accessories.