Mailer box
FEFCO 0427
The e-commerce standard. Rolled side walls, ear lock, no glue.
- Example size
- 240 × 180 × 70 mm internal
- Blank
- 546 × 579 mm
- Pieces
- 1
- Boards
- 12 available
Free to design and to download as PDF. €3 for the DXF or SVG.
How this one is built
- Folding order: 1) front and back wall up. 2) dust flaps in. 3) side wall up, over the roll bridge, inner wall down. 4) push the tongues at the foot of the inner wall straight into the slots in the base. 5) close the lid and drop the ears into the side pockets.
- Roll bridge = 4.90 mm: 2 layer(s) of 1.5 mm plus 0.40 mm clearance.
- Front and back wall are inset 3.00 mm at both ends so they fall inside the ear plane. Without that set-back the lid ear runs straight into the front wall.
- The inner wall ends in 2 tongues per side that go straight into slots in the base - no folded-over tab, so the roll has no reverse crease and the sheet never needs turning.
What you can change
6 parameters on the first screen, 16 more behind advanced settings.
- Dimension mode — Internal is what the product needs; the generator adds the board caliper itself.
- Length (L)
- Width (W)
- Height (H)
- Board caliper (t) — Volgt standaard het gekozen materiaal. Handmatig overschrijven kan voor afwijkende kwaliteiten.
- Closure