Straight tuck carton
ECMA A6050
Both flaps point the same way: a cleaner front face.
- Example size
- 90 × 45 × 160 mm internal
- Blank
- 290 × 311 mm
- Pieces
- 1
- Boards
- 12 available
Free to design and to download as PDF. €3 for the DXF or SVG.
How this one is built
- Straight tuck (ECMA A6050): top and bottom both close from the back panel. Both tuck flaps point the same way, which reads cleaner on the front.
- The tuck flap is 1.90 mm narrower on each side than the closing panel - a full caliper plus clearance - so it slides past the side walls and the glue seam.
- Closing order: dust flaps in, closing panel over them, tuck flap behind the wall.
What you can change
6 parameters on the first screen, 7 more behind advanced settings.
- Dimension mode
- Length (L)
- Width (W)
- Height (H)
- Board caliper (t)
- Tuck direction